Design datas:
1. Working width: 1400-3000;
2. Design speed: 250-350m/min;
3. Steam pressure: 1.2-1.4Mpa;
4. Steam consumption: 500-800kg/h;
Technique details:
1. Modular design of the whole machine, easy to adjust and maintain;2. The new negative vacuum structure can minimize the strength of the cardboard damaged by the copper knife slot. Under the same conditions, the hardness of the cardboard produced is 10% higher than that under positive single facer;
3. Servo glue control, the glue thickness is accurate to 0.01mm, which can save starch cost to the largest extent for users;
4. Servo vector control the gap between the glue roller and the corrugated roller to ensure the efficient production of each type of corrugated and gram weight cardboard;
5. The whole machine is fully hydraulically controlled, which is easy to control the pressure of the press roller, corrugated roller and glue roller, and the production is stable;
6. The cassette change time is 15 minutes. There is no need to disassemble any bolts, equipped with an automatic guide mechanism, and one key access. Automatic discharge of residual steam, quick plug steam connector, safe and reliable operation. Equipped with electric trailer, easy to handle;
7. The gear roller is driven by independent power, and the patented gear embedded direct connection structure is efficient, energy-saving and convenient for maintenance;
8. Integrated control system, the production management and the machine are controlled by the same panel, and the 15 inch large screen displays the operation status, function selection, fault indication, fault arrangement, remote maintenance, etc., which is easy to operate and learn;
9. The electric glue system can operate automatically when the main machine stops to prevent the slurry from settling and solidifying;
10. The core paper can be equipped with an arc hot plate, which can be quickly heated and shaped to provide cardboard strength and flatness;
